当前位置: 首页>编程语言>正文

docker部署SeaTa 指定ip地址 docker安装seata

一 . 版本

   注意:如果版本不匹配也会有各种报错,可以根据官网匹配版本。

seata:1.3.0
alibaba.cloud:2.2.3.RELEASE
nacos:2.0.2

二. docker安装搭建seata服务端

         2.1 下载seata镜像

docker pull seataio/seata-server:1.3.0

        2.2 在Linux目录下创建registry.conf,我的路径在/home/data/seata/registry.conf,接下来的所有创建都在这个目录下

cd /home
mkdir data
cd data
mkdir seata
cd seata
vim registry.conf

        2.3 registry.conf中的内容如下

registry {
  type = "nacos"

  nacos {
    application = "seata-server"
    serverAddr = "127.0.0.1:8848"
    group = "SEATA_GROUP"
    namespace = ""
    cluster = "default"
    username = ""
    password = ""
  }
}

config {
  type = "nacos"

  nacos {
    serverAddr = "127.0.0.1:8848"
    namespace = ""
    group = "SEATA_GROUP"
    username = ""
    password = ""
  }
}

注意registry和config需要在同一个组下,注册中心我用的是nacos,注意nacos的地址要改。

----->>>这里我插一句,需要新建一个数据库seata,并且新建三张表,

-- -------------------------------- The script used when storeMode is 'db' --------------------------------
-- the table to store GlobalSession data
CREATE TABLE IF NOT EXISTS `global_table`
(
    `xid`                       VARCHAR(128) NOT NULL,
    `transaction_id`            BIGINT,
    `status`                    TINYINT      NOT NULL,
    `application_id`            VARCHAR(32),
    `transaction_service_group` VARCHAR(32),
    `transaction_name`          VARCHAR(128),
    `timeout`                   INT,
    `begin_time`                BIGINT,
    `application_data`          VARCHAR(2000),
    `gmt_create`                DATETIME,
    `gmt_modified`              DATETIME,
    PRIMARY KEY (`xid`),
    KEY `idx_gmt_modified_status` (`gmt_modified`, `status`),
    KEY `idx_transaction_id` (`transaction_id`)
) ENGINE = InnoDB
  DEFAULT CHARSET = utf8;

-- the table to store BranchSession data
CREATE TABLE IF NOT EXISTS `branch_table`
(
    `branch_id`         BIGINT       NOT NULL,
    `xid`               VARCHAR(128) NOT NULL,
    `transaction_id`    BIGINT,
    `resource_group_id` VARCHAR(32),
    `resource_id`       VARCHAR(256),
    `branch_type`       VARCHAR(8),
    `status`            TINYINT,
    `client_id`         VARCHAR(64),
    `application_data`  VARCHAR(2000),
    `gmt_create`        DATETIME(6),
    `gmt_modified`      DATETIME(6),
    PRIMARY KEY (`branch_id`),
    KEY `idx_xid` (`xid`)
) ENGINE = InnoDB
  DEFAULT CHARSET = utf8;

-- the table to store lock data
CREATE TABLE IF NOT EXISTS `lock_table`
(
    `row_key`        VARCHAR(128) NOT NULL,
    `xid`            VARCHAR(96),
    `transaction_id` BIGINT,
    `branch_id`      BIGINT       NOT NULL,
    `resource_id`    VARCHAR(256),
    `table_name`     VARCHAR(32),
    `pk`             VARCHAR(36),
    `gmt_create`     DATETIME,
    `gmt_modified`   DATETIME,
    PRIMARY KEY (`row_key`),
    KEY `idx_branch_id` (`branch_id`)
) ENGINE = InnoDB
  DEFAULT CHARSET = utf8;

        实现分布式每个业务库都要加一张表undo_log,不然会报错,

CREATE TABLE `undo_log` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '主键',
  `branch_id` bigint(20) NOT NULL COMMENT 'branch transaction id',
  `xid` varchar(100) NOT NULL COMMENT 'global transaction id',
  `context` varchar(128) NOT NULL COMMENT 'undo_log context,such as serialization',
  `rollback_info` longblob NOT NULL COMMENT 'rollback info',
  `log_status` int(11) NOT NULL COMMENT '0:normal status,1:defense status',
  `log_created` datetime(6) NOT NULL COMMENT 'create datetime',
  `log_modified` datetime(6) NOT NULL COMMENT 'modify datetime',
  PRIMARY KEY (`id`),
  UNIQUE KEY `ux_undo_log` (`xid`,`branch_id`)
) ENGINE=InnoDB AUTO_INCREMENT=9 DEFAULT CHARSET=utf8 COMMENT='AT transaction mode undo table';

2.4 创建推送配置文件 vim config.txt,是将文件中的配置推送到nacos中去。

vim config.txt
service.vgroupMapping.btb_tx_group=default
store.mode=db
store.db.datasource=druid
store.db.dbType=mysql
store.db.driverClassName=com.mysql.cj.jdbc.Driver
store.db.url=jdbc:mysql://172.0.0.1:3306/seata?useUnicode=true
store.db.user=root
store.db.password=root
store.db.minConn=5
store.db.maxConn=30
store.db.globalTable=global_table
store.db.branchTable=branch_table
store.db.queryLimit=100
store.db.lockTable=lock_table
store.db.maxWait=5000

注意btb_tx_group需要与客户端保持一致,顺便注意数据库驱动,如果是8以上用我的这个驱动,5.7的用com.mysql.jdbc.Driver

        2.5 创建推送脚本,因为执行脚本要在config.txt的下一层,所有加一层目录

mkdir sh
cd sh
vim nacos-config.sh

内容如下:最好不要有任何的修改

#!/usr/bin/env bash
# Copyright 1999-2019 Seata.io Group.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at、
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

while getopts ":h:p:g:t:u:w:" opt
do
  case $opt in
  h)
    host=$OPTARG
    ;;
  p)
    port=$OPTARG
    ;;
  g)
    group=$OPTARG
    ;;
  t)
    tenant=$OPTARG
    ;;
  u)
    username=$OPTARG
    ;;
  w)
    password=$OPTARG
    ;;
  ?)
    echo " USAGE OPTION: bash nacos-config.sh -h 127.0.0.1 [-h host] [-p port] [-g group] [-t tenant] [-u username] [-w password] "
    exit 1
    ;;
  esac
done

if [[ -z ${host} ]]; then
    host=localhost
fi
if [[ -z ${port} ]]; then
    port=8848
fi
if [[ -z ${group} ]]; then
    group="SEATA_GROUP"
fi
if [[ -z ${tenant} ]]; then
    tenant=""
fi
if [[ -z ${username} ]]; then
    username=""
fi
if [[ -z ${password} ]]; then
    password=""
fi

nacosAddr=$host:$port
contentType="content-type:application/json;charset=UTF-8"

echo "set nacosAddr=$nacosAddr"
echo "set group=$group"

failCount=0
tempLog=$(mktemp -u)
function addConfig() {
  curl -X POST -H "${contentType}" "http://$nacosAddr/nacos/v1/cs/configs?dataId=&group=$group&content=&tenant=$tenant&username=$username&password=$password" >"${tempLog}" 2>/dev/null
  if [[ -z $(cat "${tempLog}") ]]; then
    echo " Please check the cluster status. "
    exit 1
  fi
  if [[ $(cat "${tempLog}") =~ "true" ]]; then
    echo "Set = successfully "
  else
    echo "Set = failure "
    (( failCount++ ))
  fi
}

count=0
for line in $(cat $(dirname "$PWD")/config.txt | sed s/[[:space:]]//g); do
  (( count++ ))
	key=${line%%=*}
    value=${line#*=}
	addConfig "${key}" "${value}"
done

echo "========================================================================="
echo " Complete initialization parameters,  total-count:$count ,  failure-count:$failCount "
echo "========================================================================="

if [[ ${failCount} -eq 0 ]]; then
	echo " Init nacos config finished, please start seata-server. "
else
	echo " init nacos config fail. "
fi

        2.6 执行推送脚本,后面是nacos的ip地址,如果端口不是8848还需要加一个-p 8884你的端口

docker run -d --restart always --name seata-server -p 8091:8091 -e SEATA_IP=172.0.0.1 -e SEATA_CONFIG_NAME=file:/data/seata/registry -v /data/seata:/data/seata  seataio/seata-server:1.3.0

        2.7 创建容器,注意SEATA_IP如果是阿里云服务器需要写外网ip,

注意:这里引用的环境变量(-e)是容器中的。

三 . 客户端(也就是微服务,项目中使用seata)

<!-- seata分布式事务--> <dependency> <groupId>com.alibaba.cloud</groupId> <artifactId>spring-cloud-starter-alibaba-seata</artifactId> <exclusions> <exclusion> <groupId>io.seata</groupId> <artifactId>seata-spring-boot-starter</artifactId> </exclusion> </exclusions> </dependency> <dependency> <groupId>io.seata</groupId> <artifactId>seata-spring-boot-starter</artifactId> <version>1.3.0</version> </dependency>

3.1 pom.xml 引入依赖

#seata
seata.application-id=${spring.application.name}
seata.tx-service-group=btb_tx_group
seata.config.type=nacos
seata.config.nacos.server-addr=172.0.0.1:8848
seata.config.nacos.group=SEATA_GROUP
seata.registry.type=nacos
seata.registry.nacos.application=seata-server
seata.registry.nacos.server-addr=172.0.0.1:8848
seata.registry.nacos.group=SEATA_GROUP

注意这里一定要剔除原来自带的 io.seata包,并且服务端和客户端的包版本要一致。

3.2 配置项目配置文件

@GlobalTransactional

注意:这里的btb_tx_group要跟服务端的vgroupMapping后面的key保持一致,

如:service.vgroupMapping.btb_tx_group=default

3.3 加入注解使用

扩展:

问题: 我用的是一个数据库,执行报错,说我缺少主键,于是我在表undo_log加了一个增的主键id,上面的创建undo_log表的sql是我加了id的,官方给的是没有id的。请知晓!!!!

docker部署SeaTa 指定ip地址 docker安装seata,docker部署SeaTa 指定ip地址 docker安装seata_vim,第1张

#单数据源 seata.enable-auto-data-source-proxy=true #多数据源 seata.enable-auto-data-source-proxy=false单数源是有报错的,原因是因为我是一个数据库,需要设置代理配置如下 ,根据自己实际情况是指配置文件,不然会报错


https://www.xamrdz.com/lan/5s61937241.html

相关文章: